MENG MONSTER TRUCK: FORD F-350 SUPER DUTY CREW CAB TO 1:24 SCALE


THIS KIT WAS A GREAT surprise - and a delight to many model makers - when it was announced. Until now, Meng, one of the newer Chinese model companies operating out of Hong Kong, has concentrated mostly on 1:35 scale AFVs and associated military, with a few aircraft in 1:72, 1:48, and 1:32 scales. Now this 1:24 scale kit - a Ford F-350 Super Duty Crew Cab - has been produced to fill a gap that seems to have been oddly missed by the American manufacturers.


Mat Irvine: This review will be followed by a buildup in the not too distant future, but until then, let’s have a look at what’s in the Meng Ford F-350 box. What you get is a highly-detailed kit, with full engine, chassis, and drivetrain detail. The four-wheel drive axles are there, and the front wheels are steerable.

Box contents (below) include a single chrome-plated runner, a small decal sheet, and peel-off chrome foil for the rear-view mirrors.


The cab is a one-piece moulding, with separate floor, side panels, and seats. Even the headlining is separate, a feature that’s rare on any model car (or truck) kit. The pick-up bed has separate sides as well as tailgate, and there are parts to extend the bed with the tailgate down, to make for a slightly larger load area. That option, and a choice between two sets of wheels, are the only variations available, but too much of a choice can sometimes be a disadvantage - here you can just get on and enjoy the build.

The box is somewhat unusual, having a slip-on outer cover (below).


Being a full-blooded US pickup, the Ford F-350 has a large amount of chrome, which is reflected in this Meng model. Besides both sets of wheels, the massive grille and bumpers are also chrome-plated. The small, but comprehensive, decal sheet provides classic blue Ford oval badges. The colour-printed instructions give details for stock colours - graphite, red, and green.


As I mentioned, the US kit companies have missed out on these larger Ford pickups. Fine if you want the best-selling F-150, or even an F-250. However, the last F-350 available was the early 1990s version by Monogram.

The 20-page instruction booklet (below) is detailed and clearly laid out.


Scale stats
Meng Ford 350 Super Duty Crew Cab
Scale: 1:24
Parts: 171
Assembled length: 277 mm (10.75 in)
Manufacturer’s ref: CS-001

Thanks to Models for Sale for supplying the kit.


Comments

Post a Comment

Popular posts from this blog

SPACE IN MINIATURE MODEL REFERENCE GUIDES

Image
Mat Irvine reports Mike Mackowski is a long-time space modeller and one of the main members of the online Yahoo ‘Space Modelers’ group. Over some years now, Mike has compiled seven hardcopy books especially for modellers on spacecraft topics, including titles for Gemini, Mercury and two volumes on Apollo, one for the Command Service Module and one for the Lunar Module. Now he has produced his first ‘Tech Report’, a series intended to be shorter and to be available only as a download, thus having the advantage that they can be in colour. Skylab details Tech Report #1.0 (TR1) is on Skylab, prompted by Mike’s particular interest in America’s first space station. Mike worked for a time at McDonnell Douglas in St Louis, where Skylab’s airlock module was built. Previously he had spent time as a student at NASA’s Marshall Spaceflight Center in Huntsville, Alabama, where the Skylab trainer was housed. He was also at Marshall when Skylab was actually launched in 1973. What’s in the TR1 pdf TR1 ...
Read more

DRONE AERODYNAMICS SHOWN IN AMAZING NASA COMPUTER MODEL

Image
FOR DECADES, NASA HAS USED computer models to simulate the airflow around aircraft, in order to test designs and especially, to improve aerodynamic performance. At the NASA Ames Research Center in California, researchers used this technique to explore the aerodynamics of a popular consumer drone, a modified DJI Phantom 3 quadcopter.  According to Ames, the simulation reveals the complex motions of air particles, made especially so by the interactions between the Phantom 3's four twin-blade rotors and the X-shaped body. In the video, airflow interactions are shown as undulating lines, low-pressure air in blue, high-pressure in red. The drone that NASA chose, the highly respected DJI Phantom 3, is a good example of a serious-amateur level machine.   Drone manufacturer DJ reckons the all-white machine can do plenty: * Easy to Fly: An intelligent flight system automatically keeps your Phantom 3 Standard in the air and under your control. * Amazing Images: Take stunning 2.7K HD vid...
Read more

LUNOKHOD MOON LANDER - THE LITTLE ROVER THAT COULD

Image
Mat Irvine reports Today is the 37th anniversary of the second - and last - landing on the Moon by a Soviet automated rover, the eight-wheel Lunokhod 2, taken to the lunar surface by the Luna 21 carrier vehicle. Following the Lunokhod 1 that landed on November 17, 1970, Lunokhod 2 performed even better, sending back more than 80,000 TV images and travelling nearly 37 km (23 miles) over a period of some four months, until it stopped working. The precise reason for this has never really been determined, but it’s thought that either moon dust covered the radiators and it overheated, or perhaps it fell into a crater - or both. The Lunokhods (Russian for 'Moonwalker') are arguably the most delightful-looking spacecraft ever designed, fact or fiction. They actually look more as if they were created by Rowland Emett (famed for his whimsical creations) than as working scientific equipment. A Lunokhod would make a great model kit, and although none has appeared to date, there is the ter...
Read more